Because of the high price, solid wood furniture is a symbol of grade and identity in the minds of many consumers. But now there are many consumers who can't tell the difference between solid wood furniture and general panel furniture, and it is not clear how to buy real quality solid wood furniture. How to buy solid wood furniture? Nine tricks teach you to play easily!
1. How to distinguish whether it is solid wood material?
A mystery to determine whether solid wood furniture is: wood grain and knots. The appearance of a cabinet door looks like a pattern, so look at the corresponding pattern on the back of the cabinet door. If the correspondence is very good, it is a pure solid wood cabinet door. Also look at the knot is also a good way to identify pure wood: optimistic about the location of the scar side, and then find the corresponding pattern on the Other side.
2. What are the common solid wood materials?
Ordinary solid wood furniture usually uses eucalyptus, white oak, ash, eucalyptus, eucalyptus, rubber wood, eucalyptus, while the valuable mahogany furniture mainly uses rosewood, wenge, rosewood. The market for solid wood furniture is confusing, and there are often cases of shoddy and confusing trees. It is best to buy brand-name products. At the same time, it should be noted that the price of wood is rising day by day, and it is absolutely cheap to be too cheap.
3. How to distinguish the quality of solid wood?
Open the furniture cabinet door and drawers and observe whether the wood is dry and white, and the texture is tight and delicate. If you have furniture made of materials such as particle board, MDF and one-time forming board, open the door or drawer and smell a pungent smell.
4. Observe the presence or absence of defects in wood
The main stress-bearing parts of the furniture, such as the column and the load-bearing horizontal strip connecting the column to the ground, should not have large knots or cracks or cracks. The structure is firm, the frame must not be loose, and it is not allowed to break or break the material. The components of the wood-based panels used in the furniture shall be edge-sealed, and the various accessories shall be installed with few pieces, missing nails and nails.
5. Observe the strength of the board surface
The surface of the board can be pressed with a finger to feel its fastness. The material should be fixed with a well-shaped skeleton. If the skeleton is sparse, the surface will feel empty and false, and the panel will vibrate greatly. The bottom of the drawer should be pressed by hand to test the strength. Generally, the bottom of the partition is multi-layered with a large area. The board should be made of five layers. Doors and drawers switch to be flexible. When veneer panel cladding and other materials, should be similar to the color of packaged product, the product surface coating does not allow wrinkled skin, sticky lacquer and drain.
6. Check stability and safety
Observe the presence or absence of the drawer or the door frame tilting phenomenon, whether there is a skew of the eye caused by the twisted eye position or the eye hole is too large, and the hoe is not strict. Wooden furniture should be safe and stable. When the two doors are opened 90 degrees, the hand can be gently pulled forward, the cabinet can not be tilted forward automatically; the glass of the bookcase door should be treated with edging; the mirror and The dressing table should be equipped with a back panel, and the bead should be fixed to the glass surface. Individual parts of the furniture (such as legs, drawers, doors or brackets) must be supported. You can push the top corner of the furniture or sit on one side and try to make sure the furniture is firm.
7. Check the interface rails and other details
It is advisable to purchase a dovetail joint or a butterfly joint. Heavier furniture should be screwed with a protective block at the corner and glued. As for the back plate part, it is also necessary to check whether it is set and the screws are attached.
The drawer should be solid and secure with the screws tightened inside. It is a good idea to open the drawers, the event table, the doors and other parts to ensure that they can be used freely and properly connected.
8. Check if the surface is smooth
Place your hand on the surface of the furniture and carefully check whether the polished surface is smooth. In particular, avoid the roughness of the table legs, whether the paint is streaked, whether the pigment in the corner is too thick, and whether there are cracks or bubbles.
9. Turn the furniture upside down to observe
Turn the chair upside down on the furniture and look at how they are made. As for the table, check from the bottom to see if the joint is reinforced with screws and wedges. Is the strip and the cross-lock fastened, and the joint has no excess glue or filler.
Jc001.load('news_ads'); jc001.newsAds.prints("30")
Privacy Tempered Glass, Matte Tempered Glass,Tempered Glass Window
Shanghai Lead Glass Co.,Ltd , https://www.leadglaze.com