Use of bracket type protective mask

Using a stand-type protective mask with a hard hat is something we're all familiar with. These masks can be removed and used independently, but the installation process can sometimes be confusing. Here’s a step-by-step guide to help you install and use it properly:

1. First, choose a suitable helmet that fits comfortably. Remove the 305 bracket from the protective mask and attach it to the selected helmet. Make sure the bracket is securely fastened in the designated position.

2. When assembling the helmet and bracket, ensure that all slots align correctly. Adjust the position as needed and secure it firmly to prevent any movement during use.

3. Take out the face mask and remove the protective film covering it. Place the mask onto the bracket and make sure all the latches are properly engaged. This ensures a tight and secure fit.

4. When using the mask, be mindful of heat sources. High temperatures can affect the refractive index of the lens, which may impair your vision. Avoid placing the mask near direct heat or in excessively hot environments.

5. Before each use, always check the stability and integrity of the mask. Ensure there are no cracks, damages, or deformations that could compromise its effectiveness.

6. Store the protective mask in a dry, clean, and well-ventilated area, such as a warehouse or a security tool cabinet. Avoid damp or overheated conditions. The shelf life is typically five years, and masks older than this should be evaluated before use. Never wear a damaged or compromised mask.

Copyright Statement: This article is reproduced from online media and reflects only the author's opinion. It is not affiliated with this site. If any content infringes on your legal rights, please contact us, and we will address it promptly.