Use of bracket type protective mask

Wearing a stand-type protective mask with a hard hat is something we are quite familiar with. This type of mask can be removed and used independently, but there are specific installation methods that need to be followed when attaching it to the helmet. The process might not be immediately clear, so here's a detailed guide:

1. First, choose a suitable helmet and remove the 305 bracket from the mask. Place the bracket on your chosen helmet, ensuring it is securely positioned.

2. When assembling the helmet and bracket, make sure all slots align properly. Adjust the position as needed and fix it in place for stability.

3. Take out the face mask, peel off the protective film, and place it onto the bracket. Ensure all latches are locked correctly. There are various modern protective masks available on the market today.

4. When using the mask, be cautious of high temperatures, as they can affect the refractive index of the lens and impair the wearer’s vision. Avoid placing the mask near heat sources or in excessively hot environments.

5. Before use, always check the stability and integrity of the mask. Make sure it is undamaged and properly assembled to ensure maximum protection.

6. Store the protective masks in dry, clean, well-ventilated areas such as warehouses or secure tool cabinets. Avoid exposure to moisture and excessive heat. The shelf life is typically five years. After this period, assess the condition before using and never wear a damaged mask.

Copyright Statement: This article is reproduced from online media and reflects only the author's opinion. It is not affiliated with this site. If any content or comments infringe upon your legal rights, please contact us, and we will address the issue promptly.